• 244KG of bollard force with 280 KG payload
  • Simple, intelligent & robust electronics
  • Latest technology and Cutting edge software
  • Comprehensive stock of spares, minimal lead time
  • Field proven, reliable system
  • High power to size ratio
  • High quality components
  • Robust control system
  • Very strong polypropylene chassis
  • Highly flexible
  • Large space available
  • Length: 2140mm
  • Width: 1350mm
  • Height: 1170mm
  • Weight: 740kg (without any payload)
  • Weight: 1200kg- 1300kg(with payload)
  • Payload (weight in water): 280kg
  • SWL: 1500kg
  • Depth Rating: 500m, ( 1000m, 2000m and 3000m optional)
  • Material:
    • Body: : PP, anodized 6082-T6 Aluminium
    • Electric bottles: Anodized 6082-T6 Aluminium
    • Deployment:Live boat, Lock latch optional
  • Forward Speed: 3 knots
  • Forward thrust: 244kg
  • Backward thrust: 244kg
  • Lateral thrust: 244kg
  • Vertical thrust: 258kg
  • Pitch/roll compensated high accuracy flux gate with ±1 degree accuracy
  • Optional pitch/roll output
  • Top quality compact depth sensor
  • 12bits ADC and high speed data processor
  • The G4R is based on RS422 multi drop points, each part is of the ROV has its own dedicated processor and address with HCU manipulating the data flow. This method minimizes firmware problems and maximizes the speed.
  • Very simple electronics

The ROV can be equipped with the following equipment with or without the need for a tooling skid, powered with a 13kW HPU (37lpm @ 210Bar – 20kW electric power required)

  • Sensors: CTD, CP, bathy & altimeter, profilers, FMD, DVL, acoustic beacon, etc.
  • Cable/Pipe Tracker: TSS350, TSS440, TSS660
  • Manipulators: 7 function and 5 function manipulator (Schilling or Hydrolek)
  • Tooling: Cutting (Anvil cutter, Grinder), Jetting, Cleaning, Dredging
  • Customized skids as per client’s requirements
  • Power Required: 380-475VAC 3ph 50/60HZ 56KW ( 75 HP )
  • Pan and tilt unit accepts two cameras and two lights with accurate angle position of ±1 degree accuracy and backlash of less than 0.5 degrees.
  • Up to 8 cameras SD
  • 2 HD cameras
  • PAL/NTSC optional
  • Overlay: date, time, depth, heading, tilt angle
  • Up to 6 LED light modules with 5000Lm light intensity each, dimmable through RS485 bus
  • Powered by 7 x SPE-250 reliable thrusters, 4 lateral and 3 vertical each incorporating unique Statorshield™ Technology allowing the thruster to continue running even in case of shaft seal failure.
Social media & sharing icons powered by UltimatelySocial
Scroll to Top